Websites rarely ever have every product cataloged for every model so I don't always trust the "Does not fit your vehicle". It uses handlebar clamps so I don't see why it wouldn't fit. The only other variable would be the fork width for the supports at the bottom but you could easily use P-clamps or something to secure it to the forks if it needs a little modifying.
Fitted the mra screen off my CB500F. Cut the bottom to shape to suit headlight, you can buy them for round lights.
Wind now goes to top of helmet and nice and quiet again. Good even in strong winds. Got 85 mpg (UK) last day out.
Don't know how to load pic from ipad
I ordered an MRA Universal screen from Ebay. Then found out the mount is too big for the handlebars by a bit. Can't tighten it down. Did you have this issue? Anyone have any ideas on how to remedy this? What's the exact size of the stock handlebars? Thanks!
I dont really like the massive ones and was thinking of getting something small but not sure if it actually does anything to protect you from the wind on the highways?
I have a full face helmet so I am not looking for protection against rocks/bugs, just want it to help with the wind drag on the highways.
I dont really like the massive ones and was thinking of getting something small but not sure if it actually does anything to protect you from the wind on the highways?
I have a full face helmet so I am not looking for protection against rocks/bugs, just want it to help with the wind drag on the highways.
The bars are 1” . My mra came with a reducer for 22mm bars on the CB500F , so not needed here. Odd that “ Thriller “ couldn’t get his clamp tight . I’d have thought a bit of tape would solve the problem.
I'm disappointed to hear that the stock windscreen is useless. I was also looking at smaller ones, but I'm having a hard time finding a good review. Any one have good recommendations?
Also, does the Corbin Gungighter seat a passenger on that rear part, or is that just for back support?
I've put nearly 1000 miles on my rebel in the past week, and I am feeling sore from constantly fighting the wind!
I don't ride with a passenger on my Corbin but I've heard that some do but it seems to me the slope of the seat towards the rear would make the passenger slip off the back.
The Dart and/or the National Cycles fly screens work great. I have the National Cycle.
I love my Puig windscreen. installs very well, and is high quality.
I've asked the same questions about the Corbin seat, but apparently none of us has really tried it i have yet to have a passenger either with stock seat or my Corbin
I use the MRA Universal (mounting kit sold separately) and it has made a big difference when going 45+ mph. Still feel the wind on my helmet but I am tall so that probably can't be helped. Install was straight forward, no modifications needed.
I first had a Puig, but it doesn´t fit on the Rebel. After that I mounted a Dart Classic. It´s nearly as small as the original Honda and it transforms gusts and heavy winds into very little buffets of air.
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Related Threads
?
?
?
?
?
Honda Rebel 300, 500, & 1100 Forum
70.5K posts
8.5K members
Since 2017
A forum community dedicated to the Honda Rebel 300 500, & 1100 . Come join the discussion about performance, custom mods, accessories, maintenance, and more!