Honda Rebel 300 & 500 Forum banner

1 - 5 of 5 Posts

·
Registered
Joined
·
27 Posts
Discussion Starter #1
For those like me who have a problem with the position of the switch there is an easy fix.
I wanted to revolve the switch a few degrees to bring the button higher on the bars , but Honda had fixed it in position with a small post in the bottom section of the switch ,which engages in a hole in the bars, underneath.
By separating the two parts of the switch you can see the post and remove it with a dremel or a file.
Now there is nothing to stop the switch revolving.
It makes the switch much easier to locate and has little effect on the horn and light switches
 

Attachments

·
Registered
Joined
·
268 Posts
Nice touch. Could a second hole also be drilled? I also moved the position on mine when I swapped bars. I drilled a new hole where I wanted it.
 
1 - 5 of 5 Posts
Top