Honda Rebel 300 & 500 Forum banner

1 - 11 of 11 Posts

·
Registered
Joined
·
4 Posts
Discussion Starter #1
What’s going on every one? I have a 2017 Honda rebel 500 and I’m new to the forum. I have only about 150 miles on the bike but I have done some modifications. I have changed the exhaust, removed the rear fender, added a led brake/turn signal light, mounted my license plate on to the left of the tire, bar end and also changed my handle bars to the Biltwell Keystone XL handlebars. Feel free to ask me any questions about them! I will attach some before and after pictures below. Let me know you guys thoughts and opinions I’d appreciate it.
 

Attachments

·
Registered
Joined
·
4 Posts
Discussion Starter #3
No brake lights or turn signals?
Yes I do have brake lights and turn signals, unfortunately not a picture. I can upload it possibly tomorrow. The turn signals and brake lights are right under my seat a tad bit over the tire. I created a bracket and mounted a led strip that had the brake lights and turn signals.
 

·
Registered
Joined
·
3 Posts
Where’d you get the brake and blinker light from, I’m looking to do the same to mine. Take off that rear fender but I don’t k ow what to do about the lights and license plate. I’d appreciate it if you’d put me in the right direction.
 

·
Registered
Joined
·
4 Posts
Discussion Starter #9
Where’d you get the brake and blinker light from, I’m looking to do the same to mine. Take off that rear fender but I don’t k ow what to do about the lights and license plate. I’d appreciate it if you’d put me in the right direction.
What’s up? So as far as the brake light and turn signals I got then online. If you go on to eBay or amazon and type in something in the lines of (motorcycle brake and turn signals led strip) you should be able to find it. The strip is about 8 inches long and has the brake lights and turn signals all on it. As far as mounting it I made a little metal bracket that the led strips sticks on to since it has 3m tape. I ended up buying these Honda factory connectors as well so I didn’t have to cut or splice into the factory wires. The website I got it from is customled.com the license plate as well just go online and type in something like (motorcycle license plate side mount) it should pop right up. Just make sure you get the mount that includes license plate lights on it. Hope this helps!!
 
1 - 11 of 11 Posts
Top