Honda Rebel 300 & 500 Forum banner

1 - 13 of 13 Posts

·
Super Moderator
Joined
·
1,655 Posts
Discussion Starter #3

·
Super Moderator
Joined
·
1,655 Posts
Discussion Starter #8
I saw this the other day.
Looks like they've used a universal stand and cut the pin to clear the underside of the exhaust.
Lol, figures! It had crossed my mind whether or not it would be a "re-branding" of sorts.
Thanks for the input Twizzian!
 

·
Super Moderator
Joined
·
954 Posts
Let me know what you get back, might be interested in getting one too.
You're only asking about the one for the back, or both?
I saw the original post of this some days ago.
One poster questioned the stability of it as it's not entirely supported on only the swing arm.

That got me thinking, would it start rocking with any slight physical push & pull?
 

·
Super Moderator
Joined
·
1,655 Posts
Discussion Starter #10
Hmm, good question.. Either way, this is just the beginning, more will soon follow with their own patent on it, so I'm sure we'll see alot of different options popp up with time.
 

·
Registered
Joined
·
12 Posts
I just finished doing my chain adjustment. Follow the instructions from the Manual to the letter and it work out just great. I also cleaned and lubed the chain. Used kerosene to clean up the gunk and motul lube afterwards. I also wanted to mentioned that my front brakes started to get squeaky so I took them apart then clean up the pads. The stand I used is the one from harbor freight, had to slightly modify it to work with the bike. I will try to post some pics tomorrow.
 

·
Registered
Joined
·
814 Posts
It doesn't look like a very special stand. It is just a triple tree stand and a slightly cut rear stand. You can buy them on amazon.
 

·
Registered
Joined
·
6 Posts
did you ever take the pics. I would like to see how you modified it.

I just finished doing my chain adjustment. Follow the instructions from the Manual to the letter and it work out just great. I also cleaned and lubed the chain. Used kerosene to clean up the gunk and motul lube afterwards. I also wanted to mentioned that my front brakes started to get squeaky so I took them apart then clean up the pads. The stand I used is the one from harbor freight, had to slightly modify it to work with the bike. I will try to post some pics tomorrow.
did you ever take the pics. I would like to see how you modified it.
 
1 - 13 of 13 Posts
Top