Honda Rebel 300 & 500 Forum banner

1 - 5 of 5 Posts

·
Registered
2019 Honda Rebel 500
Joined
·
17 Posts
Discussion Starter #1
Hey guys, I just finished installing top fork covers and fork gaiters on my 2019 Honda Rebel 500 and I kept measuring and re-measuring the height of the two forks to make sure they are almost if not dead on exactly the same. I have both currently sitting 3mm up from the fork cap, the groove it has, and the triple tree, following the service manual pretty much (service manual does not state/give measurement specs). Can anyone measure their stock rebel 500 to see how high its sitting up from the top triple and send some pictures so i can use that as visual reference as well? Much appreciated. If its off I will be adjusting and leveling out the front forks as necessary.
 

·
Registered
2019 Honda Rebel 500
Joined
·
17 Posts
Discussion Starter #5
The workshop manual says

Align the top end of the fork pipe with the upper
surface of the top bridge..

looks about right (y)
Thanks for the reply mate, I was doubting myself after remeasuring so many times. All is good now and verified correct.
 
1 - 5 of 5 Posts
Top