Honda Rebel 300, 500, & 1100 Forum banner
1 - 20 of 21 Posts

· Registered
Joined
·
21 Posts
Discussion Starter · #5 ·
All retrofits need to be improved before installation.
The front fork covers need 1.5mm rubber pads.
Fork mounted wind reflectors need to replace longer screws (5mm)
Windshield needs to be cut by myself. Then paint.
The installation hole of foot pegs needs to be expanded by about 0.2mm
 

· Registered
Joined
·
21 Posts
Discussion Starter · #9 ·

· Registered
2021 Honda CMX1100 DCT
Joined
·
198 Posts

Have ordered these, not that familiar with this aliexpress but hopefully shouldn't be a problem.. After get these and my oval black mirrors will probably be the end of Mods for me for quite a while anyway .. Learned from my Victory's owned that these fork covers can be a life saver on your seals all you have to do is look at how much Bug Guts you wipe off the Covers .. :)
 

· Registered
Joined
·
286 Posts
Have ordered these, not that familiar with this aliexpress but hopefully shouldn't be a problem.. After get these and my oval black mirrors will probably be the end of Mods for me for quite a while anyway .. Learned from my Victory's owned that these fork covers can be a life saver on your seals all you have to do is look at how much Bug Guts you wipe off the Covers .. :)
Please let us know how well they fit.
 
1 - 20 of 21 Posts
Top