[Miller]

Has anyone figured out a way to flip the mirrors so they're under the handlebars? I'm not a big fan of bar end mirrors or how they sit on the bike now. It looks as if it would be pretty tricky to pull this off, but thought it wouldn't hurt to ask. Any feedback is much appreciated. Thanks!

 

[Twizzian]

Has anyone figured out a way to flip the mirrors so they're under the handlebars? I'm not a big fan of bar end mirrors or how they sit on the bike now. It looks as if it would be pretty tricky to pull this off, but thought it wouldn't hurt to ask. Any feedback is much appreciated. Thanks!

These are what you need, not sure where you would buy them in the US

 

[500]

Do you know the size of the handlebars? I'm sure I could find a universal one if I looked hard enough.

 

[Twizzian]

Do you know the size of the handlebars? I'm sure I could find a universal one if I looked hard enough.

I believe thier 1inch

 

[fred0666]

For sure, 1"

 

[kuri77]

At Walmart even!!!

https://www.walmart.com/ip/Addmotor...6579&wl11=online&wl12=172289524&wl13=&veh=sem
They are 7/8 inch but you can easily modify to fit

 

[Miller]

Does anyone know the thread size for the mirrors? 10mm seems to be most common on Honda bikes.

 

[willcall500]

Does anyone know the thread size for the mirrors? 10mm seems to be most common on Honda bikes.

You ever end up doing this?

 

[Miller]

yeah, I posted about it in this thread > http://www.hondarebel3forum.com/for...u-do-your-2017-honda-rebel-300-500-today.html

 

[dutchman]

real interested in this mirror setup. anybody figured out the best way to accomplish this?

 

[Twizzian]

real interested in this mirror setup. anybody figured out the best way to accomplish this?


https://www.youtube.com/watch?v=nD8VrurxZb8

You only need those clamps to invert them as pictured in an above post

 

[dutchman]

thanks Twizz!

 

[Kradmelder]

As said before, just get those 1" clamps and put them on the handlebar. But be careful you dont buy shitty ones like I did, both did break into two pieces. I got them from amazon for ca 7 Euros...
Fixed them both with fast glue and duct tape.

Or you can combine new clamps with the stock ones on the rebel, but i didnt do that since i thougth it was too difficult for me, but someone in this forum did it.

 

[heymanitsdan]

Anyone want to write up a quick tutorial (or video?!) on this? Considering where the bars are connected, it doesn't seem as straightforward as this post reads haha.

 

[Erproa]

Came across this video. Hope this helps!
https://youtu.be/crSN2XKOOl0

 

[Erproa]

Also found these clamps on eBay.
https://rover.ebay.com/rover/0/0/0?mpre=https://www.ebay.com/ulk/itm/142592695144

 

[fujirio]

Also found these clamps on eBay.
https://rover.ebay.com/rover/0/0/0?mpre=https://www.ebay.com/ulk/itm/142592695144

thanks, going to give these a try. Are these the only thing I need to mount the mirrors?

 

[Techsniffer]

thanks, going to give these a try. Are these the only thing I need to mount the mirrors?

Just be aware that ships from China and you could be waiting up to 2 months for them to arrive.

 

[Erproa]

thanks, going to give these a try. Are these the only thing I need to mount the mirrors?

https://rover.ebay.com/rover/0/0/0?mpre=https://www.ebay.com/ulk/itm/302083670983

The one I came from walnut, California



Sent from my iPhone using Tapatalk

 

[Techsniffer]

https://rover.ebay.com/rover/0/0/0?mpre=https://www.ebay.com/ulk/itm/302083670983

The one I came from walnut, California



Sent from my iPhone using Tapatalk

Just ordered mine from that link, thanks! They come as a pair correct?