[macjosh1]

Has anyone looked into these ones?


Cruiser Slip On Exhaust Systems | MotoSport

 

[Lyoko]

Has anyone looked into these ones?


Cruiser Slip On Exhaust Systems | MotoSport

Looks alot like the ones I've seen the Thai have made for it.
Might just be the same ones, bought and reselling perhaps?
No idea about the quality or sound and such with them thou.

 

[shortyg83]

Has anyone looked into these ones?


Cruiser Slip On Exhaust Systems | MotoSport

The slip ons are fine, but you will need to make an elbow for most of them to look right on the bike. You can buy a 45 degree elbow at an autoparts store and then just mod it to fit in between like I did.

But I need to add, with an elbow in place most of those exhaust would be massive on this bike. My slip on is 16".

 

[macjosh1]

The slip ons are fine, but you will need to make an elbow for most of them to look right on the bike. You can buy a 45 degree elbow at an autoparts store and then just mod it to fit in between like I did.

But I need to add, with an elbow in place most of those exhaust would be massive on this bike. My slip on is 16".

can you post a pick of yours, again if you already did it in another thread. lol.

 

[shortyg83]

Here it is before and after I wrapped it.

 

[Djdavies]

Those are all universals, so as Shorty says you'll need to get/ make a mid pipe to make it fit. Then don't expect a bunch of sweet tones from them cause the are mostly a hollow pipe.

 

[macjosh1]

Here it is before and after I wrapped it.

see that looks good. but 16", on the bike, actually looks a bit too long. or maybe its just me. lol. if it was like 4 or 5 inches shorter, be exactl what I'd be looking for. lol.

 

[macjosh1]

Those are all universals, so as Shorty says you'll need to get/ make a mid pipe to make it fit. Then don't expect a bunch of sweet tones from them cause the are mostly a hollow pipe.

some of them look like they have an elbow already, but hard to say. most pics are just general. and if their hollow, then may as well go without a pipe at all. lol. don't want to do that, I'd like to have something with baffles in it. lol.

 

[dollarbill181]

some of them look like they have an elbow already, but hard to say. most pics are just general. and if their hollow, then may as well go without a pipe at all. lol. don't want to do that, I'd like to have something with baffles in it. lol.

I've been back and forth w/ Gary Coffman from Coffman exhausts.
I've ordered their shorty for the Rebel 300, and they come w/ a baffle and looks like it's made w/ a small elbow.
Will post a video when it's installed for anyone interested. at $200 it seems like a decent in between a cheap $50 china can and a $450 TBR.

 

[macjosh1]

I've been back and forth w/ Gary Coffman from Coffman exhausts.
I've ordered their shorty for the Rebel 300, and they come w/ a baffle and looks like it's made w/ a small elbow.
Will post a video when it's installed for anyone interested. at $200 it seems like a decent in between a cheap $50 china can and a $450 TBR.

please let us know. that shorty is basically what I am looking for and if it does have baffles, all the better. thanks for inquiring with Coffman.

 

[dollarbill181]

Will do, exhaust was shipped out today, should get it by weekend. Hopefully the fit works out well.

 

[RebelRider]

I'm liking the look and sound of the Diablo exhaust by k-speed. There's a few more other than the ones I've posted.

 

[st.rebel]

Love that bit of raspyness the Diablo has going on which where I live sounds even better, nothing like ripping it down some quiet downtown street with tall buildings that this sound will echo off of. Not nearly as cool much further out!

 

[shortyg83]

I'm liking the look and sound of the Diablo exhaust by k-speed. There's a few more other than the ones I've posted.

https://m.youtube.com/watch?v=Q4kYwu0aJwU

https://m.youtube.com/watch?v=rhEoHvvf4Ck

They are 50 dollar chinese exhaust that they put their name on.

 

[Benggolf]

I have the Maverick Crushers on my Indian Scout and I tell you they sound
marvelous!

Think of keeping the exhaust on the Rebel stock for now. Find it more pleasant to ride
around town.

 

[Kjd44]

They are 50 dollar chinese exhaust that they put their name on.

So where do you find the $50 ones? I really do like the look of the dual.

 

[TheRebelAlliance]

So where do you find the $50 ones? I really do like the look of the dual.

https://www.ebay.ca/itm/Universal-M...h=item1a3aa428e0:g:xSQAAOSwdjdaFe60:rk:2:pf:0

I am looking at getting this one but apparently you need a mid piece, I am researching which specs you would need for that piece. Also would need to powder coat it, but other than that it seems to be identical to diablo just 1/5th the price