Honda Rebel 300, 500, & 1100 Forum banner

auxilery lights

317 views 1 reply 1 participant last post by  MohKraats  
#1 ·
Got myself some auxilery lights for the front.
To enhance my sight, and to imcrease my visible profile width.
Got some lights, I know give a good light pattern,
And some brackets to put thdm on the front legs.

The lights have LEDs with lenses that work very well.
They have 4 leads,
Black for 0V
Red for 12V
Yellow for DRL
Wite will strobe the mainlight

The brakets need some work.
I drilled 6,5mm holes in the ends
Image

As those posts are hollow,
I glued flanged nuts in the inside with the help of some threaded rods with araldite.
Image


Image


Then bolted the lights to the posts with a M6x40 stainless bolts.

Image


The brackets come with some additional material, of which I replaced the screws by better fitying stainless ones.
And there are some plastic patches to use to protect you bike.
For a good fit, I did cut those patches up, each into 4 pieces and did put them as follows to make the bracket fit better.
Image


On the bike it looks like this:
Image

Image


Still need to do the wiring....
I will follow up when all is installed and works.

Greez,
Moh
 
#2 · (Edited)
Hello Rebels,

I can see now !!!😃😃😃
Light are installed now, and work.
Image


Image


And ofcourse I did try them in the dark too.
Here first just the main light with dip beam.

Image


Hmmmm, right.
And then with the auxilery light too

Image


The light, where it should be, on the road, not into the air as you see with many aux lights....

Image


Me happy.
Now I can see where I ride, even in the dark.....

and that with Ali lamps.

Greez,
Moh
 

Attachments