Clarification needed for changing brick and blinkers - Honda Rebel 300 & 500 Forum
 5Likes
  • 1 Post By fujirio
  • 1 Post By kmfpo
  • 2 Post By Fletch
  • 1 Post By kmfpo
 
LinkBack Thread Tools
post #1 of 9 (permalink) Old 07-08-2018, 08:49 PM Thread Starter
Member
 
Join Date: Jul 2018
Posts: 87
Question Clarification needed for changing brick and blinkers

Hi everyone! I am not electrically inclined but am learning from everyone here on the forums. I bought a new LED brake light, rear turn signals, front turn signals, and a LED flasher relay. What sort of wires/connectors do I need to purchase and how many? I have seen connectors at Eastern Beaver and CustomLED but have no idea how many or what kind I need.

I am hoping to keep the stock rear fender.

Here is what I bought so far:
Any help is appreciated! Thank you very much all.

I wanted these for rear turn signals but they are always out of stock.

Last edited by kmfpo; 07-08-2018 at 08:51 PM.
kmfpo is offline  
post #2 of 9 (permalink) Old 07-09-2018, 10:21 AM
Senior Member
 
fujirio's Avatar
 
Join Date: Apr 2018
Posts: 188
Quote:
Originally Posted by kmfpo View Post
Hi everyone! I am not electrically inclined but am learning from everyone here on the forums. I bought a new LED brake light, rear turn signals, front turn signals, and a LED flasher relay. What sort of wires/connectors do I need to purchase and how many? I have seen connectors at Eastern Beaver and CustomLED but have no idea how many or what kind I need.

I am hoping to keep the stock rear fender.

Here is what I bought so far:
Any help is appreciated! Thank you very much all.

I wanted these for rear turn signals but they are always out of stock.


You will need a pair of each for the front and back LED's. CustomLED sells them. Here. Also the Flash relay is good, just install it after you finish installing all the turn signals and brake signals.
fujirio is offline  
post #3 of 9 (permalink) Old 07-09-2018, 12:59 PM Thread Starter
Member
 
Join Date: Jul 2018
Posts: 87
Quote:
Originally Posted by fujirio View Post
You will need a pair of each for the front and back LED's. CustomLED sells them. Here. Also the Flash relay is good, just install it after you finish installing all the turn signals and brake signals.
Ok, so 2 sets of the 2-wire (they come in pairs) and 2 sets of the 3-wire?
kmfpo is offline  
post #4 of 9 (permalink) Old 07-09-2018, 01:15 PM Thread Starter
Member
 
Join Date: Jul 2018
Posts: 87
Ok, I ordered 2 sets of 2-wire and 2 sets of the 3-wire, led flash relay, and no connectors from here. is there anything else I need?
kmfpo is offline  
post #5 of 9 (permalink) Old 07-09-2018, 01:57 PM
Senior Member
 
fujirio's Avatar
 
Join Date: Apr 2018
Posts: 188
Quote:
Originally Posted by kmfpo View Post
Ok, so 2 sets of the 2-wire (they come in pairs) and 2 sets of the 3-wire?
Sorry let me clarify, they come in a pair so one set of each.
Kenny G likes this.
fujirio is offline  
post #6 of 9 (permalink) Old 07-09-2018, 04:20 PM Thread Starter
Member
 
Join Date: Jul 2018
Posts: 87
@fujirio
Thanks for the clarification, order is on it's way. Planning on doing this Saturday!
fujirio likes this.
kmfpo is offline  
post #7 of 9 (permalink) Old 07-10-2018, 12:55 AM
Senior Member
 
Fletch's Avatar
 
Join Date: Oct 2017
Location: Sydney, Australia
Posts: 167
Garage
Don't forget to disconnect your battery before fiddling with wiring. You may find you blow a few fuses otherwise.

Fletch

668 The Neighbour of the Beast
Fletch is offline  
post #8 of 9 (permalink) Old 07-10-2018, 08:53 AM Thread Starter
Member
 
Join Date: Jul 2018
Posts: 87
Quote:
Originally Posted by Fletch View Post
Don't forget to disconnect your battery before fiddling with wiring. You may find you blow a few fuses otherwise.
Haha will do. Already have the video ready that walks me through it, along with some extra fuses just in case
Fletch likes this.
kmfpo is offline  
post #9 of 9 (permalink) Old 07-13-2018, 06:56 PM
Junior Member
 
Join Date: May 2018
Posts: 8
Please link video.
TheRickShow is offline  
Reply

Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page



Posting Rules  
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome